Synthesis and anti-cancer activity of dinuclear platinum(II) complexes containing bis(thioalkyl)dicarba-closo-dodecaborane(12) ligands

A series of novel, dinuclear (2,2':6',2'-terpyridine)platinum(ii) complexes containing bis(thioalkyl)-dicarba-closo-dodecaborane(12)(carborane) ligands were prepared and characterised, and their preliminary anti-cancer characteristics have been determined in vitro; the complexes are the first examples of bis-intercalator complexes containing a boron-rich carborane cage.     

A model for quantitatively describing linear velocity programming in capillary SFC

Summary Linear velocity in capillary SFC is commonly controlled by restricting capillaries. In this paper, a model is described that quantitatively predicts the linear velocity of a supercritical fluid in SFC using tapered or ceramic frittype restrictors. In this model, the flow from the restricting capillary is assumed to be an isentropic expansion. The variation of the linear velocity as a function of pressure, temperature and cross-sectional area of the restricting aperture was predicted by this model. This predictive capability is important to the use of gradient programming in capillary SFC. Finally, the ideal variable restrictor for gradient programming was found to be one that could reversibly increase or decrease the linear velocity independent of the pressure, temperature, and/or density conditions used to create the gradient.     

Determination of deoxynivalenol in cereals and cereal products by immunoaffinity column cleanup with liquid chromatography: interlaboratory study

An interlaboratory study was performed on behalf of the UK Food Standards Agency to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatographic (LC) method for the determination of deoxynivalenol in a variety of cereals and cereal products at proposed European regulatory limits. The test portion was extracted with water. The sample extract was filtered a applied to an immunoaffinity column. After being washed with water, the deoxynivalenol was eluted with acetonitrile or methanol. Deoxynivalenol was quantitated by reversed-phase LC with UV determination. Samples of artificially contaminated wheat-flour, rice flour, oat flour, polenta, and wheat based breakfast cereal, naturally contaminated wheat flour, and blank (very low level) samples of each matrix were sent to 13 collaborators in 7 European countries. Participants were asked to spike test portions of all samples at a range of deoxynivalenol concentrations equivalent to 200-2000 ng/g deoxynivalenol. Average recoveries ranged from 78 to 87%. Based on results for 6 artificially contaminated samples (blind duplicates), the relative standard deviation for repeatability (RSDr) ranged from 3.1 to 14.1%, and the relative standard deviation for reproducibility (RSDR) ranged from 11.5 to 26.3%. The method showed acceptable within-laboratory and between-laboratory precision for all 5 matrixes, as evidenced by HorRat values < 1.3.     

Palladium salicylaldimine complexes containing boronate esters

Reactions of salicylaldehydes with boronate ester derivatives of aniline have been examined. Addition of these Schiff base ligands to palladium acetate or Na₂PdCl₄ afforded novel boron-containing trans-bis(N-arylsalicylaldiminato) palladium complexes.Condensation of salicylaldehyde (2-HOC₆H₄C(O)H) with H₂NC₆H₄Bpin (pin=1,2-O₂C₂Me₄) afforded the boron-containing Schiff bases, 2-HOC₆H₄C(H)=NC₆H₄Bpin (1–3a). Similar reactivity with 2-hydroxy-5-nitrobenzaldehyde and 2-hydroxy-1-naphthaldehyde gave the corresponding Schiff bases (1-3b) and (1-3c), respectively. Reaction of Schiff bases (2) and (3) with palladium acetate or Na₂PdCl₄ afforded complexes of the type PdL₂ (4,5), where L=deprotonated Schiff base. The molecular structure of the nitro-salicylaldehyde 4-Bpin palladium complex (5b) was characterized by an X-ray diffraction study. All new palladium compounds have been characterized fully and tested for their antifungal activity against Aspergillus niger and Aspergillus flavus.     

Potentiometric and spectrophotometric titration of Cu2+ complexes with N-isopropyl-2-methyl-1,2-propanediamine

The complexation of Cu²⁺ by N-isopropyl-2-methyl-1,2-propanediamine (L) has been studied by potentiometric and spectrophotometric titration. The dominant complexes formed in this system are [CuL]²⁺, [CuL₂]²⁺, [Cu₂L₂(OH)₂]²⁺, and [CuL(OH)₂]. The data were thoroughly tested for different models with [CuL(OH)]⁺, [CuL(OH)]⁺, [Cu(OH)]⁺, and [Cu₂(OH)₂]²⁺ as additional species. The importance of steric factors is indicated by the d-d* spectra: for [CuL₂]²⁺, (λ_max = 499 nm) the absorption maximum is shifted by 50 nm to high energies relative to [Cu(en)₂]²⁺, (λ_max = 549 nm), whereas the opposite is true for the 1:1 complexes ([CuL]²⁺ : λ_max = 712 nm,s [Cu(en)]²⁺ : λ_max = 660 nm).     

In-lens cryo-high resolution scanning electron microscopy: methodologies for molecular imaging of self-assembled organic hydrogels.

The micro- and nanoarchitectures of water-swollen hydrogels were routinely analyzed in three dimensions at very high resolution by two cryopreparation methods that provide stable low-temperature specimens for in-lens high magnification recordings. Gemini surfactants (gS), poly-N-isopropylacrylamides (p-NIP Am), and elastin-mimetic di- (db-E) and triblock (tb-E) copolymer proteins that form hydrogels have been routinely analyzed to the sub-10-nm level in a single day. After they were quench or high pressure frozen, samples in bulk planchets were subsequently chromium coated and observed at low temperature in an in-lens field emission SEM. Pre-equilibrated planchets (4-40 degrees C) that hold 5-10 microl of hydrogel facilitate dynamic morphological studies above and below their transition temperatures. Rapidly frozen samples were fractured under liquid nitrogen, low-temperature metal coated, and observed in-lens to assess the dispersion characteristics of micelles and fragile colloidal assemblies within bulk frozen water. Utilizing the same planchet freezing system, the cryoetch-HRSEM technique removed bulk frozen water from the hydrogel matrix by low-temperature, high-vacuum sublimation. The remaining frozen solid-state sample faithfully represented the hydrogel matrix. Cryo- and cryoetch-HRSEM provided vast vistas of hydrogels at low and intermediate magnifications whereas high magnification recordings and anaglyphs (stereo images) provided a three-dimensional prospective and measurements on a molecular level.     

Boiling Temperature and Reversed Deliquescence Relative Humidity Measurements for Mineral Assemblages in the NaCl + NaNO3 + KNO3 + Ca(NO3)2 + H2O System

Boiling temperature measurements have been made at ambient pressure for saturated ternary solutions of NaCl + KNO₃ + H₂O, NaNO₃ + KNO₃ + H₂O, and NaCl + Ca(NO₃)₂ + H₂O over the full composition range, along with those of the single salt systems. Boiling temperatures were also measured for the four component NaCl + NaNO₃ + KNO₃ + H₂O and five component NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O mixtures, where the solute mole fraction of Ca(NO₃)₂, x{Ca(NO₃)₂}, was varied between 0 and 0.25. The maximum boiling temperature found for the NaCl + KNO₃ + H₂O system is ≈134.9 ^∘C; for the NaNO₃ + KNO₃ + H₂O system is ≈165.1 ^∘C at x(NaNO₃) ≈ 0.46 and x(KNO₃) ≈ 0.54; and for the NaCl + Ca(NO₃)₂ + H₂O system is 164.7 ± 0.6 ^∘C at x{NaCl} ≈ 0.25 and x{Ca(NO₃)₂} ≈ 0.75. The NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O system forms molten salts below their maximum boiling temperatures and the temperatures corresponding to the cessation of boiling (dry-out temperatures) of these liquid mixtures were determined. These dry-out temperatures range from ≈300 ^∘C when x{Ca(NO₃)₂} = 0 to ≥ 400 ^∘C when x{Ca(NO₃)₂} = 0.20 and 0.25. Mutual deliquescence/efflorescence relative humidity (MDRH/MERH) measurements were also made for the NaNO₃ + KNO₃ and NaCl + NaNO₃ + KNO₃ salt mixture from 120 to 180 ^∘C at ambient pressure. The NaNO₃ + KNO₃ salt mixture has a MDRH of 26.4% at 120 ^∘C and 20.0% at 150 ^∘C. This salt mixture also absorbs water at 180 ^∘C, which is higher than expected from the boiling temperature experiments. The NaCl + NaNO₃ + KNO₃ salt mixture was found to have a MDRH of 25.9% at 120 ^∘C and 10.5% at 180 ^∘C. The investigated mixture compositions correspond to some of the major mineral assemblages that are predicted to control brine composition due to the deliquescence of salts formed in dust deposited on waste canisters in the proposed nuclear repository at Yucca Mountain, Nevada.     

Scheduling jobs on heterogeneous processors

We consider the problem of schedulingn jobs nonpreemptively onm processors to minimize various weighted cost functions of job completion times. The time it takes processorj to process a job is distributed exponentially with rate parameter _j , independent of the other processors. Associated with jobi is a weightw _i . There are no precedence constraints and any job may be processed on any processor. Assume that _{1 2}...µ _m andw ₁w ₂...w _n . Then for certain weighted cost functions, the optimal policy is such that the processors can be partitioned into setsS ₁, ...,S _n+1 such that if the fastest available processor is in setS _i ,i=1, ...,n, then jobi should be assigned to it, and if it isS _n+1, it will never be used. After each assignment the jobs are renumbered (so that jobi+1 becomes jobi if jobi is assigned to a processor). The partitioning is independent of the job weights and the states (busy or idle) of the processors. The optimal policy can be determined in at most max {m, n} steps. If all the weights are identical, the optimal policy reduces to a simple threshold rule such that a job should be assigned to the fastest available processor, sayj, if there are more thanK _j jobs waiting.K _j will depend on ₁, ..., _j but not on _j+1, ...,µ _m . The optimal policy is also individually optimal in the sense that it minimizes the cost for each jobi subject to the constraint that processors will first be offered to the jobs in the order 1, 2, ...,n.We explicitly characterize the optimal policy for several specific examples of cost functions, such as weighted flow time, weighted discounted flowtime, and weighted number of tardy jobs.     

Instability criteria for steady flows of a perfect fluid

An instability criterion based on the positivity of a Lyapunov-type exponent is used to study the stability of the Euler equations governing the motion of an inviscid incompressible fluid. It is proved that any flow with exponential stretching of the fluid particles is unstable. In the case of an arbitrary axisymmetric steady integrable flow, a sufficient condition for instability is exhibited in terms of the curvature and the geodesic torsion of a stream line and the helicity of the flow.